wifidog源码分析 - 客户端检测线程

引言
  当wifidog启动时,会启动一个线程(thread_client_timeout_check)维护客户端列表,具体就是wifidog必须定时检测客户端列表中的每个客户端是否在线,而wifidog是通过两种方式进行检测客户端在线情况,一种是定时通过iptables获取客户端出入总流量更新客户端时间,通过最近更新时间进行判断(有新的出入流量则更新客户端时间,之后使用最新客户端时间与当前时间判断),一种是查询认证服务器,通过认证服务器的返回信息进行判断(将客户端IP和状态请求发送给认证服务器,认证服务器会返回客户端是否在线,这种情况是用于客户端是在认证服务器上正常登出)。

thread_client_timeout_check
此线程执行函数用于维护客户端列表,此线程是一个while (1)循环,每隔一个配置文件中的checkinterval时间间隔执行一次fw_sync_with_authserver函数,核心代码处于fw_sync_with_authserver函数中,我们先具体代码,

void
thread_client_timeout_check(const void *arg)
{
    pthread_cond_t        cond = PTHREAD_COND_INITIALIZER;
    pthread_mutex_t        cond_mutex = PTHREAD_MUTEX_INITIALIZER;
    struct    timespec    timeout;

    while (1) {
        /* 设置超时时间 */
        timeout.tv_sec = time(NULL) + config_get_config()->checkinterval;
        timeout.tv_nsec = 0;

        /* 使用pthread_cond_timedwait必须先上锁 */
        pthread_mutex_lock(&cond_mutex);

        /* 等待超时 */
        pthread_cond_timedwait(&cond, &cond_mutex, &timeout);

        /* 解锁 */
        pthread_mutex_unlock(&cond_mutex);

        debug(LOG_DEBUG, "Running fw_counter()");

        /* 执行核心代码 */  
        fw_sync_with_authserver();
    }
}

fw_sync_with_authserver
  此函数是此线程的核心函数,维护客户端列表就在此中,其首先会遍历客户端列表,通过iptables获取每个客户端列表的出入流量,之后根据出口流量(入口流量不做判断,详见 代码片段1.3)更新客户端最近更新时间(last_updated),之后使用每个客户端最近更新时间与当前时间比较,如果超过超时间隔则判断为下线,而如果未超时,则还会从认证服务器中获取此客户端状态,确定其是否在线。具体流程如下

更新客户端出入口流量,根据出口流量更新每个客户端的最近更新时间
客户端超时则从客户端列表中移除并通过iptables禁止其访问网络,并告知认证服务器此客户端下线
客户端未超时则从认证服务器获取此客户端信息,判断其是否通过认证服务器下线
代码片段1.2:

void
fw_sync_with_authserver(void)
{
    t_authresponse  authresponse;
    char            *token, *ip, *mac;
    t_client        *p1, *p2;
    unsigned long long        incoming, outgoing;
    s_config *config = config_get_config();

    /* 根据iptables流量更新最近更新时间,具体代码见 代码片段1.3 */
    if (-1 == iptables_fw_counters_update()) {
        debug(LOG_ERR, "Could not get counters from firewall!");
        return;
    }

    LOCK_CLIENT_LIST();

    /* 遍历客户端列表 */
    for (p1 = p2 = client_get_first_client(); NULL != p1; p1 = p2) {
        p2 = p1->next;

        ip = safe_strdup(p1->ip);
        token = safe_strdup(p1->token);
        mac = safe_strdup(p1->mac);
        outgoing = p1->counters.outgoing;
        incoming = p1->counters.incoming;

        UNLOCK_CLIENT_LIST();
        /* ping一下此客户端,不清楚作用 */
        icmp_ping(ip);
        /* 将客户端的出入流量上传至认证服务器,此时如果此客户端在认证服务器上下线会返回告知wifidog */
        if (config->auth_servers != NULL) {
            auth_server_request(&authresponse, REQUEST_TYPE_COUNTERS, ip, mac, token, incoming, outgoing);
        }
        LOCK_CLIENT_LIST();

        /* 从客户端列表获取IP,MAC对应客户端 */
        if (!(p1 = client_list_find(ip, mac))) {
            debug(LOG_ERR, "Node %s was freed while being re-validated!", ip);
        } else {
            time_t    current_time=time(NULL);
            debug(LOG_INFO, "Checking client %s for timeout:  Last updated %ld (%ld seconds ago), timeout delay %ld seconds, current time %ld, ",
                        p1->ip, p1->counters.last_updated, current_time-p1->counters.last_updated, config->checkinterval * config->clienttimeout, current_time);
            /* 判断是否超时,(最近更新时间 + 超时时间 <= 当前时间) 表明以超过超时时间,下线 */
            if (p1->counters.last_updated +
                (config->checkinterval * config->clienttimeout)
                <= current_time) {
                debug(LOG_INFO, "%s - Inactive for more than %ld seconds, removing client and denying in firewall",
                        p1->ip, config->checkinterval * config->clienttimeout);
                /* 修改iptables禁止此客户端访问外网 */
                fw_deny(p1->ip, p1->mac, p1->fw_connection_state);
                /* 从客户端列表中删除此客户端 */
                client_list_delete(p1);

                /* 通知认证服务器此客户端下线 */
                if (config->auth_servers != NULL) {
                    UNLOCK_CLIENT_LIST();
                    auth_server_request(&authresponse, REQUEST_TYPE_LOGOUT, ip, mac, token, 0, 0);
                    LOCK_CLIENT_LIST();
                }
            } else {
                /* 未超时处理 */
                if (config->auth_servers != NULL) {
                    /* 判断认证服务器返回信息 */
                    switch (authresponse.authcode) {
                        /* 认证服务器禁止其访问网络(下线或遭拒绝) */
                        case AUTH_DENIED:
                            debug(LOG_NOTICE, "%s - Denied. Removing client and firewall rules", p1->ip);
                            fw_deny(p1->ip, p1->mac, p1->fw_connection_state);
                            client_list_delete(p1);
                            break;

                        case AUTH_VALIDATION_FAILED:
                            debug(LOG_NOTICE, "%s - Validation timeout, now denied. Removing client and firewall rules", p1->ip);
                            fw_deny(p1->ip, p1->mac, p1->fw_connection_state);
                            client_list_delete(p1);
                            break;

                        /* 认证服务器允许其访问网络(在线) */
                        case AUTH_ALLOWED:
                            if (p1->fw_connection_state != FW_MARK_KNOWN) {
                                debug(LOG_INFO, "%s - Access has changed to allowed, refreshing firewall and clearing counters", p1->ip);
                                if (p1->fw_connection_state != FW_MARK_PROBATION) {
                                    p1->counters.incoming = p1->counters.outgoing = 0;
                                }
                                else {

                                    debug(LOG_INFO, "%s - Skipped clearing counters after all, the user was previously in validation", p1->ip);
                                }
                                p1->fw_connection_state = FW_MARK_KNOWN;
                                fw_allow(p1->ip, p1->mac, p1->fw_connection_state);
                            }
                            break;

                        case AUTH_VALIDATION:
                            debug(LOG_INFO, "%s - User in validation period", p1->ip);
                            break;

                            case AUTH_ERROR:
                                    debug(LOG_WARNING, "Error communicating with auth server - leaving %s as-is for now", p1->ip);
                                    break;

                        default:
                            debug(LOG_ERR, "I do not know about authentication code %d", authresponse.authcode);
                            break;
                    }
                }
            }
        }

        free(token);
        free(ip);
        free(mac);
    }
    UNLOCK_CLIENT_LIST();
}

代码片段1.3:

int
iptables_fw_counters_update(void)
{
    FILE *output;
    char *script,
         ip[16],
         rc;
    unsigned long long int counter;
    t_client *p1;
    struct in_addr tempaddr;

    /* 通过iptables获取其出口流量 */
    safe_asprintf(&script, "%s %s", "iptables", "-v -n -x -t mangle -L " TABLE_WIFIDOG_OUTGOING);
    iptables_insert_gateway_id(&script);
    output = popen(script, "r");
    free(script);
    if (!output) {
        debug(LOG_ERR, "popen(): %s", strerror(errno));
        return -1;
    }

    /* iptables返回信息处理 */
    while (('\n' != fgetc(output)) && !feof(output))
        ;
    while (('\n' != fgetc(output)) && !feof(output))
        ;
    while (output && !(feof(output))) {
        rc = fscanf(output, "%*s %llu %*s %*s %*s %*s %*s %15[0-9.] %*s %*s %*s %*s %*s %*s", &counter, ip);
        //rc = fscanf(output, "%*s %llu %*s %*s %*s %*s %*s %15[0-9.] %*s %*s %*s %*s %*s 0x%*u", &counter, ip);
        if (2 == rc && EOF != rc) {
            if (!inet_aton(ip, &tempaddr)) {
                debug(LOG_WARNING, "I was supposed to read an IP address but instead got [%s] - ignoring it", ip);
                continue;
            }
            debug(LOG_DEBUG, "Read outgoing traffic for %s: Bytes=%llu", ip, counter);
            LOCK_CLIENT_LIST();
            /* 通过ip获取客户端信息结构 */
            if ((p1 = client_list_find_by_ip(ip))) {
                /* (上一次出口总流量(outgoing) + wifidog启动时的出口总流量(outgoing_history) < iptables返回的出口总流量) 表示此客户端有新的出口流量 */
                if ((p1->counters.outgoing - p1->counters.outgoing_history) < counter) {
                    /* 更新上一次出口总流量(outgoing)为wifidog启动时的出口总流量(outgoing_history) + iptables返回总流量(counter) */
                    p1->counters.outgoing = p1->counters.outgoing_history + counter;
                    /* 更新最近更新时间为当前时间 */
                    p1->counters.last_updated = time(NULL);
                    debug(LOG_DEBUG, "%s - Updated counter.outgoing to %llu bytes.  Updated last_updated to %d", ip, counter, p1->counters.last_updated);
                }
            } else {
                debug(LOG_ERR, "Could not find %s in client list", ip);
            }
            UNLOCK_CLIENT_LIST();
        }
    }
    pclose(output);

    /* 通过iptables获取其入口流量,入口流量不做更新最近更新时间参考,只用于更新后上传至认证服务器,其原理同上,后面的代码不做详细分析 */
    safe_asprintf(&script, "%s %s", "iptables", "-v -n -x -t mangle -L " TABLE_WIFIDOG_INCOMING);
    iptables_insert_gateway_id(&script);
    output = popen(script, "r");
    free(script);
    if (!output) {
        debug(LOG_ERR, "popen(): %s", strerror(errno));
        return -1;
    }


    while (('\n' != fgetc(output)) && !feof(output))
        ;
    while (('\n' != fgetc(output)) && !feof(output))
        ;
    while (output && !(feof(output))) {
        rc = fscanf(output, "%*s %llu %*s %*s %*s %*s %*s %*s %15[0-9.]", &counter, ip);
        if (2 == rc && EOF != rc) {

            if (!inet_aton(ip, &tempaddr)) {
                debug(LOG_WARNING, "I was supposed to read an IP address but instead got [%s] - ignoring it", ip);
                continue;
            }
            debug(LOG_DEBUG, "Read incoming traffic for %s: Bytes=%llu", ip, counter);
            LOCK_CLIENT_LIST();
            if ((p1 = client_list_find_by_ip(ip))) {
                if ((p1->counters.incoming - p1->counters.incoming_history) < counter) {
                    p1->counters.incoming = p1->counters.incoming_history + counter;
                    debug(LOG_DEBUG, "%s - Updated counter.incoming to %llu bytes", ip, counter);
                }
            } else {
                debug(LOG_ERR, "Could not find %s in client list", ip);
            }
            UNLOCK_CLIENT_LIST();
        }
    }
    pclose(output);

    return 1;
}

本文章由 http://www.wifidog.pro/2015/02/02/wifidog%E5%AE%A2%E6%88%B7%E7%AB%AF%E6%A3%80%E6%B5%8B.html 整理编辑,转载请注明出处

标签: wifidog认证 wifidog安装 wifidog原理 wifidog分析 wifidog配置 wifidog流程 wifidog服务器 wifidog-ddwrt wifidog openwrt